Problems In Dos; Problems In Windows; Problems With Encore Dvd Player - Creative Sound Blaster Live! Getting Started

Problems in DOS

The system stops responding during
voice output.
There is conflict between the audio card and
another card.
To resolve the conflict:
• Same as for Windows 95/98 in the
previous section.
Problems in Windows NT
4.0
A Service Control Manager error
message appears with one or more
other error messages at system restart.
This occurs after you remove an audio card
from your computer after you have
successfully installed Sound Blaster Live!
cards. The drivers of the removed audio card
cannot find the card.
To solve this problem:
1. Log on to your computer as
Administrator.
2. Click the Start button, point to Settings,
and then click Control Panel.
3. Double-click the Multimedia icon, and
then click the Devices tab.
4. In the list, remove from under these
entries
• Audio Devices
• MIDI Devices And Instruments
the items other than
D-4 Troubleshooting
• Audio for Creative SB Live!
• MIDI for Creative SB Live!
• MIDI for Creative S/W Synth
5. Click the OK button to close the dialog
box.
The drivers are removed.
Problems with Encore
DVD Player
The Encore DVD Player is not launched
when a DVD disc is inserted into the
drive.
To solve this problem:
1. In the Windows system tray, right-click
the Disc Detector icon, and then click
Properties.
2. On the General tabbed page of the
Creative Disc Detector dialog box, make
sure that Enable Disc Detector check box
is selected.
3. Click the Players tab.
4. Select the DVD Disc entry and then click
the Select Player button.
5. In the Players Properties dialog box, click
the Browse button.
6. Browse to C:\Program Files\Creative\PC-
DVD Encore
and double-click the entry ctdvdply
The Name box now displays the entry
ctdvdply.
7. Click the OK button twice to close.
Now when you double-click the Disc Detector
icon, the Encore DVD Player is launched.