Connect Cables To The Audigy 2 Zs Audio Card - Creative Audigy 2 ZS Platinum User Manual

Step 5: Connect cables to the Audigy 2 ZS audio card
This step only applies if you are installing the Platinum Drive (included with Audigy 2 ZS Platinum).
Warning!
Use the AD_EXT cable ONLY with the Platinum Drive. Do not attempt to use a conventional IDE cable or any other cable with
the Platinum Drive as it may cause electrical shorts and permanent damage to your Audigy 2 ZS audio card, Platinum Drive and
computer. It will also void the warranty for this product.
Align the red-colored wire to Pin 1 of the connector.
Component
1. Internal FireWire (IEEE 1394) cable
2. Pin 1
3. AD_EXT cable
4. Red-colored wired
5. Joystick/M IDI cable