Audigy 2 Zs Audio Card; Audio Inputs; Audio Outputs; Firewire (Ieee 1394) Interfaces - Creative Audigy 2 ZS Platinum User Manual

Connectivity

Audigy 2 ZS audio card

Audio Inputs

Line-level analog Line input via stereo jack on rear bracket
Mono Microphone analog input via stereo jack on rear bracket
CD_IN line-level analog input via 4-pin Molex connector on card
AUX_IN line-level analog input via 4-pin Molex connector on card
TAD line-level analog input via 4-pin Molex connector on card
CD_SPDIF digital input via 2-pin Molex connector on card

Audio Outputs

Digital Out via 4-pole 3.50 mm (1/8-inch) minijack on rear bracket
Three line-level analog outputs via 4-pole 3.50 mm (1/8-inch) minijacks on rear bracket: Front Left, Front Right, Rear Left, Rear Right,
Side Right, Center, Subwoofer and Side Left channels
Stereo headphone (32-ohm load) support on Line Out 1

FireWire (IEEE 1394) Interfaces

2 x 5 pin internal FireWire (IEEE 1394) connector on card
6-pin FireWire (IEEE 1394) connector on rear bracket
Other Interfaces
2 x 8 pin header for connection to the Joystick/MIDI bracket (optional)
Joystick/MIDI bracket
15-pin Joystick/MIDI connector on rear bracket
Platinum Drive

Inputs and outputs on front panel

Two RCA jacks for coaxial SPDIF input and output
Headphone output and volume control with auto detection via 6.35 mm (1/4-inch) stereo jack
Shared line-level analog Line/Microphone input (Line In 2/Mic In 2) via 6.35 mm (1/4-inch) stereo jack. Shared input selectable via
knob with gain control for microphone.
Two mini MIDI female connectors for MIDI input and output
Two RCA jacks for Auxiliary input
Two optical connectors for optical SPDIF input and output
FireWire (IEEE 1394) connector for FireWire (IEEE 1394) compatible devices
Infrared receiver for receiving infrared signals from the remote control. Transmission range within four meters (13 feet) with 15-degree
deviation from the center axis.
Interfaces
4-pin power supply header for connection to system power supply unit
2 x 20 pin AD_EXT header for connection to Audigy 2 ZS audio card
2 x 5-pin FireWire (IEEE 1394) header for connection to Audigy 2 ZS audio card