Step 6: Connect Cables To Sound Blaster Audigy 2 Card - Creative Sound Blaster Audigy2 Platinum User Manual

Step 6: Connect
cables to Sound
Blaster Audigy 2
card
Use the AD_EXT cable with
the Audigy 2 Drive ONLY. Do
not attempt to use a
conventional IDE cable or any
other cable with the Audigy 2
Drive as that may cause
electrical shorts and permanent
damage to the Audigy 2 card
and Audigy 2 Drive, which will
void the warranty for this
product. Your computer may
potentially be damaged too.
1. Connect the Joystick/MIDI cable to the Joystick/MIDI connector on the Sound Blaster Audigy 2 card
as shown in Figure 1-13.
A
Figure 1-13: Connecting the cables to the Sound Blaster Audigy 2 card.
2. Connect the AD_EXT cable from the Audigy 2 Drive to the AD_EXT connector on the Sound Blaster
Audigy 2 card.
3. Connect the Internal SB1394/FireWire cable from the Audigy 2 Drive to the Internal SB1394/FireWire
port on the Sound Blaster Audigy 2 card.
3
B
1
2
C
A: Internal SB1394/
FireWire cable
B: AD_EXT cable
C: Joystick/MIDI cable
Installing Hardware 1-19