HP FlexNetwork MSR Series Configuration Manuals page 102

Comware 7 acl and qos
Hide thumbs Also See for FlexNetwork MSR Series:
Table of Contents

Advertisement

Verifying the configuration
# Verify that the related route on Router B takes effect.
[RouterB] display ip routing-table 1.1.1.0 24 verbose
Summary Count : 1
Destination: 1.1.1.0/24
Protocol: BGP
SubProtID: 0x2
Cost: 0
IpPre: 1
Tag: 0
OrigTblID: 0x0
TableID: 0x2
NibID: 0x15000000
AttrID: 0x0
Flags: 0x10060
Label: NULL
BkLabel: NULL
Tunnel ID: Invalid
BkTunnel ID: Invalid
# Display the QoS policy configuration on GigabitEthernet1/0/2 of Router B.
[RouterB] display qos policy interface gigabitethernet 1/0/2
Interface: GigabitEthernet1/0/2
Direction: Inbound
Policy: qppb
Classifier: default-class
Matched : 51 (Packets) 4022 (Bytes)
5-minute statistics:
Forwarded: 0/28 (pps/bps)
Dropped
Operator: AND
Rule(s) :
If-match any
Behavior: be
-none-
Classifier: qppb
Matched : 0 (Packets) 0 (Bytes)
5-minute statistics:
Forwarded: 0/0 (pps/bps)
Dropped
Operator: AND
Rule(s) :
If-match ip-precedence 1
If-match qos-local-id 3
Process ID: 0
Preference: 255
QosLocalID: 3
OrigVrf: default-vrf
OrigAs: 1000
LastAs: 1000
Neighbor: 168.1.1.1
OrigNextHop: 168.1.1.1
RealNextHop: 168.1.1.1
BkNextHop: N/A
Interface: GigabitEthernet1/0/2
BkInterface: N/A
: 0/0 (pps/bps)
: 0/0 (pps/bps)
Age: 00h00m33s
State: Active Adv
100

Advertisement

Table of Contents
loading

Table of Contents