Schwinn 270 Assembly Manual / Owner's Manual page 42

Condition/Problem
No speed/RPM reading,
Console displays "Please
Pedal" error code
Resistance does not
change (machine turns on
and operates)
Console shuts off (enters
sleep mode) while in use
Fan will not turn on or will
not turn off
Fan will not turn on, but
Console operates
42
Things to Check
Check data cable integrity
Check data cable
connections/orientation
Check magnet position
(requires shroud removal)
Check Speed Sensor
(requires shroud removal)
Batteries (if equipped)
Check Console
Check data cable integrity
Check data cable
connections/orientation
Check Servo Motor
(requires shroud removal)
Check electrical (wall)
outlet
Check connection at front
of unit
Check data cable integrity
Check data cable
connections/orientation
Reset machine
Check magnet position
(requires shroud removal)
Check Speed Sensor
(requires shroud removal)
Check data cable integrity
Check data cable
connections/orientation
Reset machine
Check for blockage of fan
Speed sensor should be aligned with magnet and connected to
If the above steps do not resolve the problem, contact Cus
Speed sensor should be aligned with magnet and connected to
Solution