Verifying The Vethernet Interface Configuration - Cisco Nexus 1000V Configuration Manual

For vmware vsphere
Hide thumbs Also See for Nexus 1000V:
Table of Contents

Advertisement

Configuring Virtual Ethernet Interfaces
Step 5
This example shows how to enable a vEthernet interface:
switch# configure terminal
switch(config)# interface vethernet 100
switch(config-if)# no shutdown
switch(config-if)# show interface veth100 status
--------------------------------------------------------------------------------
Port
--------------------------------------------------------------------------------
Veth100
switch(config-if)#

Verifying the vEthernet Interface Configuration

Use one of the following commands to verify the configuration:
Command
show interface vethernet interface-number [brief |
counters [detailed [all] | errors] | description |
mac-address | status [ down | err-disabled | inactive
| module num | up ] | switchport]
show interface [vethernet interface-number]
show interface [vethernet interface-number] brief
show interface [vethernet interface-number]
description
show interface [vethernet interface-number]
mac-address
show interface [vethernet interface-number] status
[down | err-disabled | inactive | module num | up]
show interface [vethernet interface-number]
switchport
show interface virtual [vm [vm_name] | vmk | vswif]
[module mod_no]
Command or Action
switch(config-if)# copy
running-config startup-config
Name
Status
--
Cisco Nexus 1000V for VMware vSphere Interface Configuration Guide, Release 5.x

Verifying the vEthernet Interface Configuration

Purpose
(Optional)
Saves the change persistently through reboots and restarts
by copying the running configuration to the startup
configuration.
Vlan
Duplex
Speed
up
1
auto
Purpose
Displays the vEthernet interface configuration.
Displays the complete interface configuration.
Displays the abbreviated interface configuration.
Displays the interface description.
Displays the interface MAC address.
For vEth interfaces, this command shows
Note
the MAC address of the connected device.
Displays the interface line status.
Displays interface switchport information.
Displays virtual interfaces only.
Type
auto
--
41

Advertisement

Table of Contents
loading

Table of Contents