Configuring Port Channels
Command
show port-channel database [interface
port-channel channel-number]
show port-channel load-balance
show port-channel summary
show port-channel traffic
show port-channel usage
show running-config interface ethernet port/slot
show running-config interface port-channel
channel-number
show running-config interface vethernet
interface-number
Monitoring Port Channels
Use the following commands to monitor the port channel interface configuration:
Command
clear counters interface port-channel
channel-number
show interface counters [module module]
show interface counters detailed [all]
show interface counters errors [module module]
show lacp counters [interface port-channel
channel-number]
Purpose
Displays the aggregation state for one or more port
channel interfaces.
Displays the type of load balancing in use for port
channels.
Displays a summary for the port channel interfaces.
Displays the traffic statistics for port channels.
Displays the range of used and unused channel
numbers.
Displays information about the running configuration
of the specified Ethernet interface.
Displays information about the running configuration
of the port channel.
Displays information about the running configuration
of the specified vEthernet interface.
Purpose
Clears the counters.
Displays input and output octets unicast packets,
multicast packets, and broadcast packets.
Displays input packets, bytes, and multicast and
output packets and bytes.
Displays information about the number of error
packets.
Displays information about LACP statistics.
Cisco Nexus 1000V for VMware vSphere Interface Configuration Guide, Release 5.x
Monitoring Port Channels
83