Verifying The Basic Interface Parameters; Feature History For Basic Interface Parameters - Cisco Nexus 1000V Configuration Manual

Verifying the Basic Interface Parameters

Procedure
Step 1
Step 2
This example shows how to clear and reset the counters on Ethernet port 5/5:
switch# clear counters ethernet 5/5
switch#
Verifying the Basic Interface Parameters
Use one of the following commands to verify the configuration:
Command
show cdp
show interface interface
show interface brief
show interface switchport

Feature History for Basic Interface Parameters

Feature Name
System jumbo MTU
Cisco Nexus 1000V for VMware vSphere Interface Configuration Guide, Release 5.x
20
Command or Action
switch# clear counters interface
switch# show interface interface
Releases
4.2(1)SV1(4)
Purpose
Clears the counters for the specified interface:
• ethernet slot/port
• vethernet number
• mgmt 0 or mgmt0
(Optional)
Displays the interface status, which includes the counters,
for the specified interface:
• ethernet slot/port
• vethernet number
• mgmt 0 or mgmt0
Purpose
Displays the CDP status.
Displays the configured states of one or all interfaces.
Displays a table of interface states.
Displays the status of Layer 2 ports.
Feature Information
The system jumbo MTU is fixed
at 9000 and cannot be changed.
Configuring Interface Parameters