A.2 Control Circuit Connection - Siemens SIRIUS 3RW55 Manual

A.2 Control circuit connection
A.2.1 Control by PLC
Automatic restart.
Can cause death or serious injury.
If a starting command is pending, a restart will be triggered automatically after the reset.
This particularly applies if the motor protection has tripped. Dangerous states of the system
can result.
Reset the start command (e.g. via the PLC or switch) before performing a reset.
To do this, for example, link the group error output (terminals 95 and 96) into the control.
Requirements
● Parameterization required
Wiring of control circuit for control by PLC
F1
Q1
Q11
Q21
M1
PE
SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002
WARNING
Fuse
Motor starter protector
3RW55 soft starter
PLC
Motor
Protective conductor
Example circuits

A.2 Control circuit connection

207