Parameters
The "Micro SD Card" menu appears after you have inserted a micro SD card into the 3RW5
HMI High Feature.
Action
Load parameter settings to soft starter
Load parameterization onto micro SD card
Device change
Back up the logbooks on the micro SD card
Delete micro SD card
FW update
Memory space
SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002
Back up the configuration data on
•
the micro SD card
Transfer configuration data to soft
•
starter
Soft starter
•
Communication
•
HMI
•
All devices
•
Complete memory
•
Free memory
•
Used memory
•
7.18 3RW5 HMI High Feature
Description
This menu item appears if a valid parameterization file is
stored on the micro SD card. The parameterization file
is transferred from the micro SD card to the soft starter.
The following data is transferred:
Device parameters of the 3RW5 HMI High Feature
•
Device parameters of the 3RW55 soft starter
•
User management / passwords
•
The parameterization file is transferred from the soft
starter to the micro SD card. The following data is
transferred:
Device parameters of the 3RW5 HMI High Feature
•
Device parameters of the 3RW55 soft starter
•
User management / passwords
•
When a device is replaced, the configuration can be
transferred to the new device. The following data is
transferred:
I&M 1 data
•
I&M 3 data
•
Device parameters of the 3RW5 HMI High Feature
•
Device parameters of the 3RW55 soft starter
•
Communication parameters
•
User management / passwords
•
The logbooks are backed up on the micro SD card. For
more information, see Chapter Logbooks (Page 187).
The contents of the micro SD card are deleted.
This menu item appears if a valid firmware file is stored
on the micro SD card. The 3RW5 HMI High Feature
automatically detects which firmware file the
micro SD card contains:
The firmware update is documented in the device
logbook.
The memory capacity is displayed.
Functions
171