Connecting An Additional Audio Player - Sennheiser HMEC 460 Instructions For Use Manual

Connecting an additional audio player

The operating control has a 3.5 mm jack socket
audio player. The required audio cable fitted with two 3.5 mm jack plugs is included.
Danger of accident due to reduced attention!
DANGER!
Listening to music or operating an audio device limits your attention and
may cause accidents.
During flight operation, do not use the headset for listening to additional
audio sources!
Hearing damage due to high volumes!
This headset is capable of producing high sound pressure levels. Higher
volumes or longer durations can damage your hearing!
Set the volume to a medium level. Make sure that you can hear critical
sounds such as warning alarms.
Connect the audio cable to the 3.5 mm jack socket
the corresponding 3.5 mm jack socket on your audio player.
Switch NoiseGard on (see page 21).
"Audio-In" signals mute automatically in the presence of intercom and/or RT traffic.
, allowing you to connect an additional
on the operating control and to
15