Preparing The Headset For Use; Connecting The Headphones And The Microphone - Sennheiser HMEC 460 Instructions For Use Manual

Connecting cable
1 5.25 mm jack plug (PJ-068 equivalent) for connecting the microphone
1 ¼" (6.35 mm) jack plug for connecting the headphones
1 XLR-3 plug for connecting the power supply for the NoiseGard electronics

Preparing the headset for use

Connecting the headphones and the microphone

To connect the headset to the intercom:
Connect the jack plugs and to the corresponding jack sockets of your intercom.
9