26
Problem
Active noise
The volume is set too
compensation but
low.
very low volume
The headphone jack plug
communication
is not connected
correctly.
Active noise
The microphone jack
compensation but
plug is not connected
reduced
correctly.
intelligibility
Communications in
You are receiving a mono
one ear only
source but the headset is
set to stereo operation.
If a problem occurs that is not listed in the above table or if the problem cannot be solved
with the proposed solutions, please contact your local Sennheiser agent for assistance.
Possible cause
Increase the volume of your headset.
Connect the headphone jack plug.
Connect the microphone jack plug.
Set the mono/stereo switch to " "
(mono).
Possible solution