Charging Status
Charging
Battery Indicator : 'Blinking' 1 sec-ON, 1sec-OFF
Full Charged
Low Battery
Battery Indicator : 'Blinking' 0.5 sec-ON, 0.5 sec-OFF
Event
Press Microphone mute
Hook Off
Audio Indicator
Event
Speaker /Microphone volume
UP/DOWN
Max/Min speaker volume reached
Max/Min microphone volume reached
Microphone mute/unmute
Mute reminder
Hook Off / On
LEDs status
Battery Indicator : 'ON'
LEDs status
Mute indicator : 'ON'
Selected Mode indicator : 'ON'
Added
Beep Sound
(High tone/Low tone)
Double beep
Double beep
Beep / Double beep
Beep (every 3 seconds)
Double beep
(High tone / Low tone)
5. Setting up the BASE
Diagram 1 (Desk phone with HEADSET port)
- Plug the supplied telephone cord into the TEL port of the BASE UNIT
- Connect the telephone cord to the HEADSET port of the desk phone
Diagram 2 ( Desk phone without HEADSET port)
-
On the desk phone, unplug the handset cable from the phone
- Plug the handset cable into the HANDSET port on the BASE UNIT
- Plug the telephone cord into the TEL port on the BASE UNIT and plug the
other end of the telephone cord into the HADNSET port on the desk phone