Connecting The Transmitter To Audio Sources - Sennheiser RS 220 Instruction Manual

Putting the RS 220 into operation
10 | RS 220

Connecting the transmitter to audio sources

You can connect up to 3 audio sources (e.g. CD player, DVD player and TV)
to the transmitter. The transmitter is fitted with 2 digital and 1 analog
inputs and outputs. If you connect several audio sources, you can conve-
niently toggle between these audio sources with a key press (see
page 21).
Switch your audio source off before connecting the transmitter.
Check the available connection possibilities of your audio source.
Select the corresponding connection cable and, if necessary, a suitable
adapter.
Connection possibilities (output) of
the audio source
RCA (analog)
A
SCART (analog)
B
Headphone socket
C
(analog)
Coaxial (digital)
D
Optical (digital)
E
Follow the instructions in the corresponding chapter in order to connect
your transmitter to the audio source.
Connecting the transmitter to RCA sockets
A
IN
R
R
9V/1A
L
L
DC IN
ANALOG
Connect the RCA plugs of the stereo audio cable
sponding RCA sockets of your audio source.
Connect the RCA plugs of the stereo audio cable
right ("R") ANALOG IN
Connection cable/adapter
Stereo audio cable with dual
L R
RCA plugs on each end
Stereo audio cable with audio
adapter (to be ordered sepa-
rately)
Stereo audio cable with audio
adapter
Coaxial cable with a single RCA
plug on each end
Optical digital cable (to be
ordered separately)
OUT
COAXIAL
Pairing
IN OUT
OPTICAL
-LEVEL
DIGITAL
input .
OUT
R L
K
K
to the corre-
K
to the left ("L") and