Hmi (Got); Connection Route - Mitsubishi Electric MELSEC iQ-R Series User Manual

4.4

HMI (GOT)

This section shows the connection method of GOT to a C Controller module.

Connection route

A C Controller module can be connected to GOT by any of the following routes.
• Connection using Ethernet port(s)
• Connection via a network module
Connection using Ethernet port(s)
Connect to GOT by using the Ethernet port(s) (CH1 and CH2).
Connection via a network module
Connection to GOT is available via any of the following network modules.
• CC-Link IE Controller Network
• CC-Link IE Field Network
• CC-Link (via an intelligent device station, G4)
For the connection methods via a network, refer to the manual for the network module used.
4
4 WIRING
27
4.4 HMI (GOT)