Generating an execution module from the user program
Convert (build) the created program into a module that can be executed on the C Controller module.
Operating procedure
1.
Select and right-click the created project in the "Project Explorer" window, and click [Rebuild Project].
2.
If the following message appears after selecting [Rebuild Project], click the [Continue] button.
The project starts to be built. The progress is displayed in the "Build Console" window.
3.
Check that "Build Finished..." is displayed in the "Build Console" window.
If "Build Finished..." is not displayed and an error occurs, check the error and modify the program.
After modifying the program, perform the operation again from 'Page 84 Generating an execution module from
the user program'.
8 OPERATION EXAMPLE
84
8.3 Programming