Adjusting The Headband - Sennheiser HMD120 Instructions For Use Manual

Connecting cable for
HME 120 and HMD 120
10
HME 120 and HMD 120 headsets
1 U-174/U jack plug for connecting the headphones and the microphone
Connect the U-174/U jack plug for the headphones and the microphone to the U-174/U socket
of your intercom.

Adjusting the headband

For good noise attenuation and best possible comfort, the headband has to be adjusted to
properly fit your head:
Wear the headset so that the headband runs over the top of your head.
Adjust the length of the headband so that
your ears are completely inside the ear cushions,
you feel even, gentle pressure around your ears,
a snug fit is ensured.
Note:
Make sure not to squeeze any connecting cable when adjusting the headband. Squeezing can
damage the connecting cables.
Final adjustment is best made in a noisy environment.