Putting The Hme 110 In Operation; Connecting The Headset; Adjusting The Headband - Sennheiser HME 110 Instruction Manual

Putting the HME 110 in operation

Putting the HME 110 in
operation

Connecting the headset

Connect the two jack plugs of the
headset to the corresponding jack
sockets of your audio system.
Jack plug
5.25 mm jack plug
(PJ-068 equivalent)
¼" (6.35 mm) jack plug

Adjusting the headband

For good noise attenuation and best possible comfort, the
headset has to be adjusted to properly fit your head. To do
so, you can adjust the headband.
CAUTION!
Damage to the product due to squeezing of cables!
When adjusting the headband, the connection cable for the
headphones can be squeezed and damaged.
Make sure not to squeeze the headphones connection
cable when adjusting the headband.
6 | HME 110
Jack socket of the audio system
1
Microphone input
2
Headphone output
1
2