Using The Headsets; Mono/Stereo Selection (Hme 100 Only); Adjusting The Volume - Sennheiser HMD120 Instructions For Use Manual

Using the headsets

Mono/Stereo selection (HME 100, HME 110)
In general, you'll receive a mono sound source so that the Mono/Stereo switch can remain set to
'Mono'. When using a stereo intercom system, set the headset to stereo operation. Remove the
ear cushion (see „Replacing the ear cushions" on page 15) from the earcup with the microphone
boom attached and set the Mono/Stereo switch to 'Stereo'.

Adjusting the volume

Exposure to loud sounds can cause hearing damage!
Set the volume control to a medium value. Make sure that you can hear critical sounds such as
warning alarms.
13