Spare Parts; Replacing The Wind Screen; Replacing The Ear Cushions - Sennheiser HMD120 Instructions For Use Manual

Spare parts

The following spare parts are available from your Sennheiser agent:
Wind screen MKE 45-1 electret microphone (Cat. No. 075823 bulk or 092804 packaged, 1 pcs.)
Cable clip MZQ 2002-01(Cat. No. 044740)
Cable clip HZC 08 (Cat. No. 525787)
Carry and storage bag (Cat. No. 078366)
Ear cushions STANDARD (Cat. No. 077960)
Ear cushions GOP (Cat. No. 092807)
Ear cushions LUXURY (Cat. No. 528127)

Replacing the wind screen

If the wind screen for the electret microphone shows signs of wear such as tears or holes, replace
the wind screen. Pull the wind screen from the microphone. Gently slide-on the new wind screen
and ensure that it fits securely over the microphone.

Replacing the ear cushions

To replace a damaged earpad, proceed as follows:
Hold the headset on the outside of the earcup and on the headband.
Grasp inside the earpad and behind the plastic base to which the earpad is glued.
Pull the plastic base together with the earpad up and away from the earcup.
Press the new earpad onto the earcup until it clicks audibly into place. Repeat for
the other earcup.
15