Sennheiser HME 120 Features And Benefits

HME 100
HME 100 Closed- Back Headset for Stereo or Mono
Featuring excellent passive attenuation and a wide frequency response, this new closed-back
headset will make communications clear. The HME 100 is fitted with a volume control for the
headphones; flexible, noise-compensated boom microphone for right or left-side use; and a
cushioned, foldable headband. A high-quality bag is supplied with the unit.
Features & Benefits
• Lightweight and comfortable
• Volume control
• MKE 45 flexible boom mic for right or left-side use
• Switchable mono/stereo
• Single-sided, round cable
• High-quality carrier bag
• FAA and JAA TSO approval C57a and C58a
Technical Data
Headphone
Transducer Principle
Ear Coupling
Frequency response
Nominal impedance (active / passive)
Attenuation (passive)
Headband pressure
Mic w/ Preamp
Transducer principle
Frequency response
Max. SPL
Min. terminating impedance
Output voltage
Operating voltage
Connection
Connector
Connecting Cable
Product Variants
Mono version of HME 100 teminated with
5-pin XLR
Mono version of HME 100 teminated with
u-174/u connection for helicopters
Sennheiser Electronic Corporation, 1 Enterprise Drive, Old Lyme, CT 06371
Telephone: 860-434-9190 • Fax: 860-434-1759 • Web: http://www.sennheiserusa.com
Sennheiser Mexico: Av. Xola 613, PH6, Col. Del Valle 03100, Mexico, DF. Telephone: (525) 639-0956. Fax: (525) 639-9482
Sennheiser Canada: 221 Labrosse Ave, Pte-Claire, PQ H9R 1A3. Telephone: 514-426-3013. Fax: 514-426-3953
Manufacturing Plant: Am Labor 1, 30900 Wedemark, Germany
Dynamic, closed back
Circumaural
45–15,000 Hz
150 (mono), 300 (stereo)
2µ dB NRR
Approx. 10 N
Electret, Noise Canceling
300–5,000 Hz
120 dB
150
400 mV ± 3 dB @ 114 dB/SPL
8–16 VDC, 8–25 mA
1/4" / PJ-068 / XLR 3-pin / U-174U / XLR 5-pin
(depending on model)
1.5 m single-sided, round cable
HME105
HME 120