Unit With Rain Hood Dimensions (20 Ton) - York SUNLINE 2000 Installation Manual

Dimensions listed are for side
duct flange openings; see
Field Accessories for Side
Duct Flange Kit.
FIGURE 11 - REAR VIEW DIMENSIONS
Units are shipped with the bottom duct open-
NOTE:
ings covered. An accessory flange kit is avail-
able for connecting side ducts.
For bottom duct applications:
1. Remove the side panels from the supply and return air
compartments to gain access to the bottom supply and
return air duct covers.
2. Remove and discard the bottom duct covers. Duct
openings are closed with sheet metal covers except
when the unit includes a power exhaust option. The
covering consists of a heavy black paper composition.
POWER EXHAUST
SUPPLY AIR
RAIN HOOD
COMPARTMENT
(on Return Air Compartment)
REAR VIEW
FIGURE 12 - UNIT WITH RAIN HOOD DIMENSIONS (20 TON)
Johnson Controls Unitary Products
40-3/8"
SUPPLY
AIR
RETURN
AIR
COMPRESSOR
ACCESS
SUPPLY AIR
ACCESS 18-5/8"
27-3/4"
5-1/8"
RETURN AIR
ACCESS
REAR
VIEW
3.
For side duct applications:
1.
2.
ECONOMIZER
MOTORIZED
DAMPER
RAIN HOOD
ECONOMIZER / MOTORIZED DAMPER
(on Outdoor Air Compartment)
AND POWER EXHAUST RAIN HOODS
36-5/8"
5"
DETAIL "Y"
UNIT WITH RAIN HOODS
OUTDOOR
AIR
OUTDOOR AIR
COMPARTMENT
39-5/8"
ACCESS
Replace the side supply and return air compartment
panels.
Replace the side panels on the supply and return air
compartments with the side duct flange accessory kit
panels.
Connect ductwork to the flanges on those panels.
FIXED
OUTDOOR AIR
INTAKE HOOD
(located on
Return Air
Compartment)
16-1/8"
28-3/16"
175245-YIM-C-1008
EVAPORATOR
SECTION
DOT PLUG
(For pressure
drop reading)
FILTER
ACCESS
40-1/2"
1" NPT FEMALE
COND. DRAIN
CONNECTION
1" CONDENSATE
DRAIN
(Must be trapped)
92"
LH VIEW
19