Safety Symbol Summary - Generac Power Systems MAGNUM MMG25IF4 Operating Manual

Safety
You can also obtain other information about motor vehicle safety from http://www.safercar.gov.

SAFETY SYMBOL SUMMARY

This equipment has been supplied with numerous safety and operating decals. These decals provide important
operating instructions and warn of dangers and hazards. Replace any missing or hard-to-read decals and use care
when washing or cleaning the unit. Decal placement and part numbers can be found in the online parts manual at
www.generacmobile.com. Below is a summary of the intended meanings for the symbols used on the decals.
Safety alert symbol;
used to alert you
to potential hazards.
Hot surface(s) nearby.
Dangerous voltage may
be present.
Check diesel fuel fill
level.
Read and understand
the operator's manual
before operating.
Stop engine.
STOP
Battery is
disconnected.
4
Asphyxiation hazard;
operate in well ventilat-
ed area.
Burn/scald hazard;
pressurized steam.
Anchor/tie down point.
Disconnect battery
before servicing.
Unit electrical ground.
Isolate generator to
prevent electrocution
hazard.
Automatic Start.
Force Exhaust
Regeneration.
Figure 1-1. Decal Safety Symbol Summary
MMG25I-35D-45I-55DF4 Operating Manual
Belt/entanglement
hazard; keep body parts
clear of this area.
Never change phase
208
120
switch position while
480 240
277 120
engine is running.
Do not remove guard.
Fire/explosion hazard;
keep open flames
away from unit.
Lift here only.
Never change switch
position while engine is
running.
Fan hazard; keep body
parts clear of this area.
01879
36949 B