Generac Power Systems Mobile Power MMG465 Specifications

Mobile Generator – MMG465 Specifications
ENGINE

John Deere
o Standby - 617 hp @ 1800 rpm
o Prime – 561 hp @ 1800 RPM
o 6 cylinder
o 13.5 L displacement
o Tier III approved
 Steel, single wall fuel tank
o 616 gal. capacity
o 29 hr. run time – full load
o Fuel tank built into skid of generator set

Fuel consumption at prime:
o 100% - 26.3 gph (99.6 Lph)
o 75% - 19.5 gph (73.8 Lph)
o 50% - 13.5 gph (51.1 Lph)

Cooling system capable of operating at 120°F ambient

Low coolant shutdown

Radiator and oil drains plumbed to exterior

Rubber vibration dampers isolate engine/generator from frame

In-line engine block heater

Disposable air filter - paper element

Air filter restriction indicator mounted on control panel

60 Hz engine/generator
 Electronic isochronous governing
GENERATOR

Marathon Electric
Brushless
o
PMG Generator - critical grade power quality
o
4 pole
o
Class H insulation
o

Voltage regulation +/- 1% with Marathon PM300 Voltage Regulator
SYSTEM OUTPUT

Link / Reconnect Board:
Three phase – 120 / 208V Low Wye
o
Three phase – 277 / 480V High Wye
o

408 kW / 510 kVA – standby, three phase

373 kW / 466 kVA – prime, three phase
Manufactured by Magnum Power Products LLC., a wholly owned subsidiary of Generac Power Systems, Inc.
RG6135HF485 - turbocharged, diesel engine
®
®
Phone: 800-926-9768 Fax: 920-361-2214 www.m-p-llc.com
Page 1 of 4
4/12