Adjusting The Volume; Adjusting The Balance; Activating/Deactivating The Lock Mode; Attaching The Receiver To Clothing - Sennheiser E W 300 IEM G2 Instructions For Use Manual

Sennheiser transmitor user manual
Table of Contents

Advertisement

SR 300 IEM G2/SR 350 IEM G2
EK 300 IEM G2

Adjusting the volume

CAUTION!
Danger of hearing damage!
Listening at high volume levels for long periods can lead to
permanent hearing defects.
Set the volume for the connected headphones to the
minimum before putting the headphones on.
You can adjust the volume at the headphone output on both the transmitter
and the receiver.
Use the volume control
headphones.

Adjusting the balance

During stereo operation – and provided that the standard display is shown
on the display panel – the /
between the left and right stereo signal.
During FOCUS operation, the
relative levels of the two separate channels in the mixed mono signal (see
"Stereo/FOCUS selection (receiver only)" on page 30).

Activating/deactivating the lock mode

Transmitter and receiver have a lock mode that can be activated or
deactivated via the operating menu (see "Activating/deactivating the lock
mode" on page 33). The lock mode prevents that
the transmitter is accidentally programmed or switched off during
operation,
the balance setting is accidentally changed via the receiver's
button.

Attaching the receiver to clothing

The receiver is attached to clothing (e.g. belt, waistband) with the supplied
belt clip.
or
to adjust the volume of the connected
rocker button
serves to adjust the balance
/
rocker button
serves to adjust the
/
rocker
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents