Connector Assignment - Sennheiser E W 300 IEM G2 Instructions For Use Manual

SR 300 IEM G2 transmitter/SR 350 IEM G2 twin transmitter
RF characteristics
RF output power at 50 Ω
ERP
Antenna output
AF characteristics
Headphone output
Output power at headphone output
AF input
Max. input voltage (peak deviation, 1 kHz)
Input impedance
Overall device
Power supply
Nominal voltage
Power consumption at nominal voltage
Dimensions [mm]
Weight
Type approvals
Area Conformity
SR 300 IEM G2
USA: FCC-Part 74.861
FCC ID: DMOF2EUVL
Canada: RSS-123
IC: 2099A - G2SREK
0682
EU:
complies with the requirements for Radio and
Telecommunications Terminal Equipment (R&TTE):
EN 300422-1/-2, class II
EN 301489-1/-9
complies with the requirements for safety (LVD):
EN 60065

Connector assignment

SR 300/350 IEM G2:
¼'' (6.3 mm) stereo jack plug
for headphone output
SR 300 IEM G2
20 mW
depending on
antenna type used
BNC socket, 50 Ω
¼'' (6.3 mm) stereo jack socket
≥ 100 mW an 32 Ω (2x)
2 x XLR-3 socket, electronically balanced
+20 dB
u
10 kΩ
SR 300 IEM G2
10,5–16 V DC
12 V DC
approx. 300 mA
212 x 145 x 38
approx. 1100 g
SR 300/350 IEM G2: SR 300:
XLR-3M connector DC connector for power
supply
2 1
+
3
SR 350 IEM G2
100 mW, switchable to 15 mW
depending on
antenna type used
BNC socket, 50 Ω
SR 350 IEM G2
100–240 V AC/50–60 Hz
approx. 400 mA
436 x 215 x 43
approx. 3960 g
SR 350 IEM G2
FCC-Part 74.861
FCC ID: DMOSR350
RSS-123
IC: 2099A-SR350
0682
complies with the requirements for Radio and
Telecommunications Terminal Equipment (R&TTE):
EN 300422-1/-2, class II
EN 300454-1/-2
EN 301489-1/-9
complies with the requirements for safety (LVD):
EN 60065
EK 300 IEM G2:
3.5 mm stereo jack plug
for headphone output
39