Extraordinary Maintenance - Smeg SFA106N Original Instructions Manual

Setting a programmed Pyrolytic cycle
It is possible to program the pyrolytic cycle
start time just like any other cooking
function.
1. After selecting the Pyrolytic function and
the duration of the cycle (excluding the
Eco Pyrolytic), press the programming
knob. The display shows the current
time, the temperature and the
indicator light comes on.
2. Turn the programming knob to set the
time you wish the Pyrolytic cycle to
finish.
3. Press the programming knob to confirm
the parameters entered. The
and indicator lights remain lit
steadily and the appliance waits for the
set start time to start the Pyrolytic cycle.
It is not possible to select any
function once the door lock device
has been activated. It remains
possible, however, to switch off the
appliance using the specific
controls.
42
Cleaning and maintenance
,

4.7 Extraordinary maintenance

Removing and installing the door seal
(not on pyrolytic models)
To remove the seal:
• Release the hooks in the 4 corners and
pull the seal outwards.
To install the seal:
• Attach the hooks in the 4 corners of the
seal.
Seal maintenance recommendations
The seals should be soft and flexible.
• To keep the seal clean, wash it using a
non-abrasive sponge and lukewarm
water.