Putting On The Heart Rate Monitor - Garmin Edge 500 Owner's Manual

Using ANT+ Sensors
Putting on the Heart Rate
Monitor
Wear the heart rate monitor directly on
your skin, just below your breastplate.
It should be snug enough to stay in
place during your ride.
Tab
Heart rate Monitor Strap
Slot
Heart rate Monitor (Front)
Electrodes
Heart rate Monitor (Back)

1. Push one tab on the strap through
the slot in the heart rate monitor.
2. Press the tab down.
3. Wet both electrodes on the back
of the heart rate monitor to create
a strong connection between your
chest and the transmitter.
4. Wrap the strap around your chest
and attach it to the other side of the
heart rate monitor.
The Garmin logo should be right-
side up.
After you put on the heart rate monitor,
it is on standby and ready to send data.
Edge 500 Owner's Manual