Acquiring Satellite
Signals
It may take 30–60 seconds to acquire
signals.
1. Go outdoors to an open area.
2. Make sure the front of the Edge
is oriented toward the sky.
3. Wait while the Edge searches for
satellites.
Stand still, and do not begin
moving until the locating satellite
page disappears.
NOTE: To turn off the GPS receiver
and use the Edge indoors, see
page
40.
Edge 500 Owner's Manual
optional Ant+ Sensors
NOTE: If you do not need to set up
ANT+ sensors, you can skip this
step.
To use an ANT+ sensor during your
ride, you must install it and pair it
with the Edge.
•
For heart rate monitor
instructions, see
•
For GSC 10 speed and cadence
sensor instructions, see
•
For power meter instructions,
see
page
26, refer to the
manufacturer's instructions, and
go to
www.garmin.com
\intosports.
getting Started
page
18.
page
22.