Rinnai RHFE-556FA Owner's Operation And Installation Manual page 36

Energysaver gas direct vent wall furnace
Hide thumbs Also See for RHFE-556FA:
Table of Contents

Advertisement

OPERATING THE TIMER(S)
t~
Before operating the Timer(s), the clock time must be correct, and a starting time and finishing time
~
for the Timer(s) must be programmed. See pages 32 and 33. The two Timers operate in the same
i
way. This heater does not commence operation at the programmed starting time. It will attempt to
)1
heat a room by the programmed starting time. See pre-heat page 35, for further explanation.
IT]
To select the Timer(s) to commence heating:
Check the time shown on the Digital Display is
correct. See page 32. Check the ON and OFF
times, for both Timers if necessary, see page
33.
~--'-----;
o
Override
~J
-"""'-----~--------1
o
CFilter
L:'
0
Child Lock Economy Timer 1
Timer 2
Press the Timer 1 and/or Timer 2 button(s).
The Timer indicator(s) will glow and the heater
will remain on standby until one hour prior to the
time programmed into the selected Timer(s) is
reached. When this time is reached, the Timer
indicator will flash and the heater will operate.
The ON indicator glows red when the heater
commences operation.
Press the ON-OFF button to operate the heater.
The On indicator will glow green and the heater
will begin to operate. Select the desired
temperature setting.
SET AND FORGET OPERATION
Your heater can be operated to alternate between Timers automatically during cold weather by selecting
Timer 1 and Timer 2 together. Both Timer indicators will glow. The appliance will remain on standby at
intervals between the programmed finishing and starting time of each Timer. While the heater is
operating during programmed intervals the Timer indicator will flash.
- - - - - - - - --------,
If there is a power failure, the system memory will retain the Timer programs, and the clock will
\
stop at the time the power goes off. The clock will start again when the power comes back on, but
the time will be slow by the duration of the power failure. To set the clock to the correct time after
the power has come back on, simply follow the instructions on page 32.
"
' J
,'-'1
(
.)
-34-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rhfe-556ftra

Table of Contents