Bobbin Winding; Removing Bobbin Case - Kenmore 385.12912 Owner's Manual

Bobbin Winding
o Removing bobbin case
Remove the extension table from the machine by pulling it to
the left, Open the shuttle cover ('fD by pulling down the em-
bossed part on the left of the cover
Raise the needle to its highest position by rotating the
handwheel toward you
(D Shuttle cover
(_ Bobbin case
To remove the bobbin caseQ from the shuttle, pull open the
latch of the bobbin case Pull the bobbin case straight out of
the shuttle
o Bobbin winding
[] Release the clutch by pulling out the handwheel This
will stop the needle from moving while you win'd the bob
bin
[]
}
_J
[] Draw thread from spool
[] Guide the thread around the thread guide
[] Thread through the hole in the bobbin from the inside to
the outside,
[] Put the bobbfn on the bobbin winder spindle
[]
[]
[]
[]
18