Craftsman 113.244530 Owner's Manual page 13

7. Locatethe bevelindicator a nd 10-32x 3/8"long
panhead screwin loose partsbag.
8. Usea #2 phillipsscrewdriver to attachthe bevel
indicatorto the backof the frame,in the small
recessbelowthe trunnion, w ith the 10-32x 3/8"
screw.
9. Alignthe bevelindicator w iththe "0"degreemark
onthetrunnion andtighten thescrew.
Bevel
Indicator
INSTALLING THE HOSE CLIP
1. Locate the Hose Clip in the loose parts bag.
Identify the barbs on the clip.
Barbs
2. Open the front cover of the saw by pulling forward
on the finger hold located on the left side of the
band saw. Locate the notch in the Frame at the
sawdust ejection port.
Notch
3. Position the Hose Clip with the barbs to the back
side of the band saw. Slide the Hose Clip into the
notch. Push the clip until it is fully seated on the
Frame. The Hose Clip will secure a Wet/Dry vac
hose in place for sawdust collection.
Hose Clip
_ 13