Craftsman 113.23611 Owner's Manual page 11

mounting the scroll saw to
1, When mounting this saw to a workbench a so,lid wood
bench is preferred over a plywood bench where noise and
vibration wilt be more noticeable.
2, Hardware to mount this saw to a workbench is NOT
supplied with the saw. However, we recommend the hard-
ware used be no smaller than the following,
Quantity Description
4 Hex Head Screws, _/_-20x Length Required
4 Flat Washers, %2 I,D.
4 Lockwashers. %2 I.D.
8 Hex Nuts, _/_-20
3, A soft foam pad to place between your scroll saw and work-
bench is NOT supplied with the saw. However, we highly
recommend the use of such a pad to reduce noise and
vibration.
Quantity
1
Description
Soft foam pad such as carpet padding,
24" x 12" x _/_"
a bench
4. Example of mounting this scrol! saw to workbench.
SCROLL SAW BASE
!
T
_" Foam Pad (optional)
WORKBENCH
Do NOT overtighten mounting bolts--leave some cushion in
the foam pad for absorbing noise and vibration,
\
LOCKWASHER
HEX NUT
IAM NUT
HEAD SCREW
4, If you prefer to mount your saw to a leg set we recommend
the leg set for bench top tools which is available through
Sears Retail or Catalog Stores. The number of this leg set
is 9-22244, This leg set is an optionat accessory and
instructions to mount the scroll saw to this leg set are
included in the leg set package,
11