JVC HX-Z1R Service Manual page 12

www.freeservicemanuals.info
HX-Z1R
7. Remove the two screws J attaching the heat sink
bracket.
8. Remove the two screws M, detach bridge board from
regulator board by disconnect connector CN205.
9. Remove the screws K and L to detach regulator
board from heat sink.
CAUTION: As assembly back the regulator board and
bridge board to heat sink.
Regulator board MUST be assembly to heat
sink first and screw K and L MUST be
screwed before bridge board attach to
regulator board.
1-12
Regulator board
K
Heat sink
Digitized in Heiloo Netherlands
Bridge board
J
Heat sink bracket
Fig.26
Heat sink bracket
Regulator board
CN205
CN215
M L
Fig.27
3/29/2018
Heat sink
Bridge board