Functions Turning On The Unit; Technical Characteristics - PRESIDENT BILL FCC Owner's Manual

C) FUNCTIONS TURNING ON THE UNIT
Three additional functions are available. KEY BEEP, COLOR
and MIC TYPE.
To activate a function, first turn off the unit. Then turn on
the radio while pressing the corresponding key (5, 7 or 5
+ 6).
1) KEY BEEP
(key 5)
Some operations such as changing channels, pressure
on keys etc. are confirmed by a beep tone. This function
can be activated or deactivated
1. Turn off the power and then turn on the power while
holding down the ROGER key (5). KEY-BP appears in the
display. The state of the function
and Of.
2. The unit automatically
mode after 3 seconds.
When the function is activated, "
2) COLOR
(key 7)
1. Turn off the power and then turn on the power while
holding down the CB/WX key (7). COLOR appears in the
display.
2. The current color symbol flashes
(cyan), (yellow),
3. Use s/t key (3) on the unit or UP/DN key (3) on the
change
microphone to
4. Press the PTT switch (11) to
as follows:
alternates between On
exits the function to return to
" is displayed.
(red), (green), (blue),
(purple), or (light blue).
the color.
confirm and exit.
5. If no key is pressed for 10 seconds, the unit automatically
exits the function to return to
3) MIC TYPE
(keys 5 + 6)
The BILL FCC accepts 6-pin PRESIDENT electret or dynamic
microphone.
In order to alternate
1. Turn off the power and then turn on the power while
holding down bot ROGER key (5) and ANL/NB key (6).
MIC-TP appears in the display. The state of the function
alternates between electret EL and dynamic dY.
2. The unit automatically
mode after 3 seconds.
Note: On power up, in order to inform the user, the pro-
grammed microphone type is displayed for 2 seconds
(see § ON/OFF page 8).
CB
A) DC-POWER TERMINAL (13,8 V)
B) ANTENNA CONNECTOR (SO-239)
C) EXTERNAL SPEAKER JACK (8 Ω, Ø 3,5 mm)
D) TECHNICAL CHARACTERISTICS
1) GENERAL
- Channels
- Modulation mode
- Frequency ranges
- Weather channels
- Antenna impedance
- Power supply
12
CB
mode.
between the two types :
exits the function to return to
: 40
: AM
: from 26.965 MHz to 27.405 MHz
: 162,400 MHz to 162,550 MHz
: 50 ohms
: 13.8 V
CB