Sunbeam Rest & Relieve Therapeutic Mattress Pad User Manual page 29

R&R_MattressPad_IB-single
OPERATING INSTRUCTIONS
Preheating the Mattress Pad
Never get into a cold bed again. Preheat warms up your Mattress Pad before
you get in. Select your desired heat setting and press Preheat for each
individual side. This feature lets two people preheat their sides at different
times.
1 To turn on preheat, after the
Mattress Pad is on, press the
"Preheat" button. All zones
will show a "P" while they are
preheating.
NOTE: Preheat will not work on the
zones that have the heat turned off
"–". See adjusting Zones
individually on page 15.
The zones will heat for
30 minutes at the
highest setting "H" and
then return to their
previously programmed
heat settings.
2 To cancel preheat after
activating it, simply
press the "Preheat"
button again. The
Mattress Pad's regular
heat settings for each
zone will resume.
NOTE: At least one zone must
be selected and have a heat
setting higher than " – " for the
preheat function to work.
For questions or support, please visit: www.sunbeam.com
12:21 PM Page 29
Zones with no heat setting (-) will not preheat
15