Sunbeam Rest & Relieve Therapeutic Mattress Pad User Manual page 19

R&R_MattressPad_IB-single 12:21 PM Page 19
OPERATING INSTRUCTIONS
Auto Off
Auto-Off feature disabled
Auto Off conserves energy by automatically
turning off the Mattress Pad after 10 hours
of use. This is the factory default setting, and
the display will read "Auto Off" when this
feature is active.
To deactivate Auto Off: press the "Auto
Off/Stay On" button.
The display will read "Stay On", and the
Mattress Pad will remain on until you turn it
off manually using the "On/Off" button.
To reactivate Auto Off: press the "Auto
Off/Stay On" button until the display shows
"Auto Off".
Auto-Off feature enabled
NOTE: After a power outage, turn the remote off, then
turn it on again to turn the mattress pad back on. The
timer of the Auto Off feature automatically resets, but
your personal heat settings are maintained.
NOTE: After a power outage, all timers (including
preheat) are reset.
10 For questions or support, please visit: www.sunbeam.com