Advertisement
Your new tractor has been assembled at the factory with exception of those parts left
unassembled for shipping purposes. To ensure safe and proper operation of your
tractor all parts and hardware you assemble must be tightened securely. Use the
correct tools as necessary to insure proper tightness.
TOOLS REQUIRED
FOR
ASSEMBLY
A socket wrench set will make assembly
easier, Standard wrench sizes you need
are listed below.
(1) 9/16"wrench
(1) Pliers
(1) 1/2"wrench
(1) Utility knife
(1) 3/4" socket with
drive ratchet
(1) Tire pressure gauge
6. Secure steedng wheel to steering
shaft with hex belt, lock washer and
large flat washer previously removed.
Tighten securely.
7. Snap steedng wheel insert into center
of steedng wheel,
8, Remove protective materials from
tractor hood and grill.
IMPORTANT: Check for and remove any
staples in skid that may puncturetires
where tractor is to roll off skid.
When dght or left hand is mentioned in
this manual, it means, from your point of
view, when you are in the operating
position (seated behind the steedng
wheel).
TO REMOVETRACTOR
FROM
CARTON
UNPACK CARTON
1, Remove all accessible loose parts
and parts cartons from carton.
2. Cut, from top to bottom, along lines on
all four comers of carton, and lay
panels fiat.
3. Remove mower and packing mated-
als.
4. Check for any additional loose parts
or cartons and remove.
BEFORE REMOVING TRACTOR
FROM SKID
ATTACH STEERING WHEEL
1. Remove hex bolt, lock washer and
large fiat washer from steedng shaft.
2. Position front wheels of the tractor so
they are pointing straight forward.
3. Slide the steedng sleeve over the
steedng shaft.
4. Align tabs and press steedng sleeve
extension into bottom of steering
wheel.
5. Position steedng wheel so cross bars
are horizontal (left to dght) and slide
onto steering wheel adapter.
Steering
__
Wheel Insert
_Hex
Bolt
___
LockWasher
S
.
(_
LargeFiat
teenng
_
_/
Steering
Wheel
Steering
_
Adapter
Sleeve _
_--_
Tabs
Extension
SteedngShatt
,,_'_",= _-,_.,
"
.i
I_
•
Ill
Steering
_
-
i
_
9
Advertisement
