Maintenance Instructions; Storage Instructions - DieHard 200.71225 Operator's Manual

Microprocessor controlled, fully automatic operation battery charger with engine starter plus battery and alternator tester
Hide thumbs Also See for 200.71225:
Table of Contents

Advertisement

17.2
Reviving your battery
operate the vehicle, you don't need to wait for the entire charging process.
When the charger displays a battery % of 77 or more, the battery has usu-
ally been charged enough for the vehicle to start and operate normally.
17.3
Completing an interrupted charge
interrupted and restarted after the charger displays a battery % of 85 or
more, the charger could go straight to Maintain Mode. However, if the
original charge was started using 30A, the charge can often be completed
using the 2A rate.
18.

MAINTENANCE INSTRUCTIONS

18.1
Before performing maintenance, unplug and disconnect battery charger
(see sections 6.7 and 7.6).
18.2
After use, use a dry cloth to wipe all battery corrosion and other dirt or oil
from terminals, cords, and the charger case.
18.3
Servicing does not require opening unit, as there are no user-serviceable
parts.
19.

STORAgE INSTRUCTIONS

19.1
Store charger unplugged, in an upright condition. Cord will still conduct
electricity until it is unplugged from outlet.
19.2
Store inside, in a dry, cool place (unless you're using an on-board Marine
Charger ).
19.3
Do not store clips on handle, clipped together, on or around metal, or
clipped to cables.
: If you only wish to charge your battery enough to
: If the charging process has been
16

Advertisement

Table of Contents
loading

Table of Contents