Siemens Cerberus PACE Operating Manual page 27

Building Technologies
Fire Safety
Playing a recorded announcement / Triggering an evacuation with a
recorded announcement
1. Select a zone or several zones by pressing the correspondingly labeled
buttons.
 Selected zone buttons light up.
2. Press a button correspondingly labeled with the required announcement.
 Already active announcements are deactivated in the selected zones.
 With the corresponding configuration, the announcement is also emitted via
the integrated speaker.
 The announcement is continually repeated.
3. Press the corresponding button labeled with the required announcement again
to end the announcement.
4. Press the selected zone buttons again.
 The button lighting goes out.
Recording an announcement
1. Press the correspondingly labeled button.
2. Press the correspondingly labeled speak button for the manual announcement.
 The microphone is activated.
3. Speak into the microphone at a normal sound level.
 The announcement is recorded in the device's internal memory.
Automatic deletion of recorded announcements
Disconnect the call station from the power supply.
κ
 Recorded voice messages are deleted from the device's internal memory.
Resetting the fault message
ϖ LED 'FAULT' lights up.
Press the corresponding button labeled <RESET>.
κ
 LED 'FAULT' goes out.
 The fault in the system has been rectified.
 The fault message is reset.
Recurring fault messages
ϖ The LED 'FAULT' lights up again.
ϖ The fault in the system has not been rectified.
Inform Siemens customer support.
κ
 Request that maintenance be carried out by technical personnel.
Desk call station (19 buttons) PT2001-A1
Desk call station operation
7
27 | 42
A6V10430571_en--_b
2018-07-19