Select A Location - Sonos User Manual

SONOS USER GUIDE
Controls and lights
Join button
Status light
Connector panel
Ethernet port
AC power (mains) input

Select a location

Choose a location—it's designed to provide optimal sound wherever you place it.
• Use the acoustic slot as a handle to lift Sub out of the box. You should always bend your knees when
lifting heavy objects to avoid undue stress on your back.
• Make sure at least one side of the slot is free from obstruction. If you place it vertically against a wall,
don't block the front opening. If you place the Sub horizontally on the floor, don't put anything on top of it.
• The Sub is designed to sit on the floor. You can place it in a corner, against the wall, behind, under, or
next to any piece of furniture on any kind of floor surface.
• Position the Sub either vertically or horizontally. If you're going to use it horizontally, you can attach the
permanent felt feet (included). See
Press to connect during setup.
Indicates the status. For more information, see 
https://faq.sonos.com/led.
Use an Ethernet cable to connect the Sub to your home
network.
Use only the supplied power cord to connect to a power
outlet (using a third party power cord will void your
warranty). Be sure to use the proper power adapter for
your country. Push the power cord firmly into the Sub
until it is flush with the surface.
Attach the feet for more information.
Make sure at least one side of the
rectangular opening (acoustic slot) is
unobstructed.
• If you place the Sub vertically flush
against a wall, don't block the
front acoustic slot.
• If you place the Sub horizontally
on the floor, don't put anything on
top of it. Leave at least 1"
clearance along the top of the Sub
if placing under furniture.