Page 1
Once you’ve set up your music system, you can add additional Sonos components any time (up to 32 rooms.). Adding to an existing Sonos system? Sonos can be easily expanded room by room. Turn to page 4 for help adding the SONOS SUB to your existing Sonos system.
4 felt feet (included with your SUB) to each of the corners. See "Attaching the feet for horizontal placement" on page 3 for more information. • Your Sonos subwoofer is designed to be located on the floor. You can place it behind, under, or next to any piece of fur- niture on any kind of floor surface.
Page 3
If you are going to use the SUB placed horizontally on a smooth floor, your SONOS SUB includes four (4) felt feet you can attach to the corners of the unit. If you are laying the SUB down on a rug or using it vertically, there’s no need to adhere the felt feet.
Page 4
Use the supplied power adapter to connect to a power outlet. Be sure to use the proper power adapter for your country. Be sure to push the power cord firmly into the SUB until it is flush with the unit.
Sonos software versions 3.6 and later. • Once the SUB is associated with a Sonos player, you will not see it displayed separately in the Rooms menu. Any chang- es you make to the Sonos player in this room (volume, mute, music selection) will also affect the SUB.
• SUB On/Off. Turns the sound from the subwoofer on and off. • SUB Level. Turns the volume of just the subwoofer up and down. Use this setting to match the subwoofer level to the level of your main speakers. This will affect the deepest bass.
If you are moving the SUB to a new room, first unplug the SUB, locate it on the floor in another room, and then plug it back in. The status light on the side of the SUB will begin to flash. Once it lights solid again, you are ready to proceed.
Mute and then unmute the Sonos component Unplug the subwoofer for several minutes to allow it to cool Flashing orange and then white Fault mode If the fault condition (above) is not remedied, the Sonos component will automatically mute itself to prevent damage.
Do not use this apparatus near water. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.