Sonos User Manual page 28

SONOS USER GUIDE
Status light
Connector panel
AC power (mains) input
AC power (mains) input
Join button
Ethernet port
HDMI port
Select a location
You can mount Beam to a wall above or below your TV or place it on a credenza.
Place on a credenza
• Place horizontally on a stable and level surface at least 2" (50mm) from the TV.
• Don't place vertically or on its side.
• Don't block the TV's IR sensor.
• If put on a shelf, place at the front and keep 2" (minimum) clearance on both sides for best sound quality.
• Keep 1" (25mm) space (minimum) above Beam so you can reach the touch controls.
Microphone
indicator
Join button
•
Tap the microphone light to turn the microphone on
or off.
•
When the light is on, voice control is on and you can
use voice commands.
•
When the light is off, voice control is off.
Note: If the light is off, press and hold the Microphone
indicator to talk to Alexa. Release the button to
turn voice control off again.
Indicates the status. For more information, see 
https://faq.sonos.com/led.
HDMI port
Ethernet port
Use only the supplied power cord (using a third-party
power cord will void your warranty).
Note: Insert the power cord firmly until it is flush with
the speaker.
Press to connect during setup.
Use an Ethernet cable if you want to connect to a router,
computer, or network-attached storage (NAS) device
(optional).
Use to connect the soundbar to your TV.