Connect The Power Cord - Sonos User Manual

SONOS USER GUIDE
Note: The Playbar's digital audio IN port and the optical cable are 'D-shaped'—make sure the connector
aligns correctly into the port.
TV's Digital Audio
OUT (optical)
Playbar's Digital
Audio IN (optical)

Connect the power cord

Attach the power cord and plug in the Playbar. Push the power cord in firmly until it is flush with the surface.
If you don't have the app, download it from the app store. You'll use it to set up and control your Sonos
system. See Getting
Wall Mount
You can mount Playbar to a wall above or below a wall-mounted TV. Use the Playbar wall mount kit. You can
buy it on www.sonos.com. Follow the instructions in the kit.
Caution: Don't use any other hardware to mount the Playbar.
Guidelines
• When mounting below a TV, keep 1" (25mm) space (minimum) between Playbar and the TV.
• When mounting above a TV, keep 2" (50mm) space (minimum) between Playbar and the TV.
• Preserve audio quality: make sure the connector panel faces away from the TV.
• Keep both ends of the Playbar at least 1 ft. (30cm) from a wall or other obstruction.
Note: Connect the power and audio cables to the Playbar before mounting to the wall.
started.
IMPORTANT: Remove the protective caps from
each end of the optical audio cable before
inserting.