Installing The Arua-10 Software; System Requirements; Installation - Kenwood TS-990S Setting Manual

3. Installing the ARUA-10 Software

3.1 System Requirements

In order to use the ARUA-10 software, your computer must meet the following
requirements.
Category
Operating System (OS)
Processor
System Memory (RAM)
Free Hard Disk Space
Software
Peripheral Devices
* Applicable operating systems are subject to change without notice due to the end of the
technical support by Microsoft Corporation or change of the product specifications.

3.2 Installation

Download and install the ARUA-10 software from the following KENWOOD website:
http://www.kenwood.com/i/products/info/amateur/software_download.html
When connecting the TS-990S to a computer using a USB cable for the first time, drivers
required for the USB Audio Function are automatically installed.
If you are using an ARCP-990 and Computer Control Command, you must install the
"Virtual COM port driver" to connect the TS-990S with a USB cable.
Download and install the driver from the following KENWOOD website:
http://www.kenwood.com/i/products/info/amateur/software_download.html
Chart 1 - Computer Requirements
Specifications
Windows 10 (version 1703 (OS Build 15063.0) or later,
32-bit or 64-bit version)
Windows 8.1 (RTM or later, 32-bit or 64-bit version)
Windows 7 (Service Pack 1 or later, 32-bit or 64-bit
version)
Faster than the recommended CPU for OS on which
you are operating
RAM having the System Memory recommended by the
respective OS used in your PC or larger
100 MB or more of free hard disk space
Microsoft .NET
Framework 4.0)
Displays with resolutions higher than SXGA (1280 x
1024)
Keyboard, mouse or other pointing devices
USB 2.0 port
Sound function and audio input / output device
(microphone and speaker, or headset)
4
Framework 4.7 (including .NET