Cisco ASR 9000 Series Configuration Manual page 91

Image Refresh Using the Archive and Restore Feature
Step 3/6: format eUSB0
Step 4/6: format eUSB1
Step 5/6: format configflash
Formatting sector 1
Step 6/6 clear NVRAM syslog files
Set BOOT=
#
fullbake
#
Phase 1 - Read and compare FATs
Phase 2 - Check cluster chains
Phase 3 - Check directories
Phase 4 - Check for lost files
423408 kb used, 575248 kb free, 14 files, 3 directories
Filesystem is clean.
Step 1/6: format bootflash
Formatting sector 1
Step 2/6: format HD
Step 3/6: format eUSB0
Step 4/6: format eUSB1
Step 5/6: format configflash
Formatting sector 1
Step 6/6 clear NVRAM syslog files
This operation will remove all installed software on this RSP, and
replace with software from /compactflash:/snapshot
Enter Yes, to continue: Continuing
Restoring image to disk0: from compactflash: Please wait ...
Restored archive of disk0: from compactflash:
Restoring image to disk0a: from compactflash: Please wait ...
Restored archive of disk0a: from compactflash:
Restoring image to disk1: from compactflash: Please wait ...
Restored archive of disk1: from compactflash:
Restoring image to disk1a: from compactflash: Please wait ...
Restored archive of disk1a: from compactflash:
Restoring image to bootflash: from compactflash: Please wait ...
Restored archive of bootflash: from compactflash:
Restoring common NVRAM variables
Set BOOT=disk0:asr9k-os-mbi-3.9.0.31I/mbiasr9k-rp.vm,1;
395.58s real
Restore from compactflash: success
#
OL-30420-01
2.51s user 2.53s system
Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x
Restoring Cisco IOS XR Image from the Local Device: Example
83