Restoring Cisco Ios Xr Image From The Local Device: Example - Cisco ASR 9000 Series Configuration Manual

Restoring Cisco IOS XR Image from the Local Device: Example

Command or Action
Step 4
fullbake
Example:
# fullbake
Phase 1 - Read and compare FATs
Phase 2 - Check cluster chains
Phase 3 - Check directories
Phase 4 - Check for lost files
Step 5 show platform command and show redundancy
summary command
Example:
RP/0/RSP0/CPU0:router# show platform
RP/0/RSP0/CPU0:router# show redundancy summary
Restoring Cisco IOS XR Image from the Local Device: Example
Rommon P4E-31 B1 >
Beginning HSBI boot:
Loading B image:
...............
program load complete, entry point: 0x1fbfb0, size: 0x3bb854
Attempting to start second CPU
SMP initialized.
Config = SMP, Running = SMP
###################
BSP: Board type : RO-RSP2
Use private TLB mappings
***********************************************
Welcome to micro XR on a ASR9K RSP
BUILD DATE: Thu Aug 27 02:47:38 PDT 2009
To start C/F: ksh /etc/cf_start
To stop C/F: ksh /etc/cf_stop
To format C/F drive with DOS: ksh /etc/cf_dos_init (cf_start first)
To format C/F drive with QNX: ksh /etc/cf_qnx_init (cf_start first)
To format eUSB0 drive: ksh /etc/usb0_init
To format eUSB1 drive: ksh /etc/usb1_init
To format both usb: ksh /etc/usb_init
To format configflash: ksh /etc/flash1_init
To format bootflash: ksh /etc/flash0_init
To start hard drive: ksh /etc/hd_start
To format hard drive: ksh /etc/hd_init
To format HD, eUSB and bootflash: ksh /etc/format_all (diskboot)
To edit Power Module cookie: pwrcookie <module_num> edit
***********************************************
#
format_all
#
Step 1/6: format bootflash
Formatting sector 1
Step 2/6: format HD
Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x
82
Purpose
Insert the compactflash device consisting of previously-saved
archive images in the active RSP card. Run the fullbake
command to execute the restore operation.
Note
Reboot the active RSP to run the restored Cisco IOS XR
software on it. The Cisco IOS XR software on the active notices
the standby RSP and provide the requisite images. Both the
active and the standby RSPs run the Cisco IOS-XR release.
boot hsbi:
Image Refresh Using the Archive and Restore Feature
This command performs a device format, followed
with the restore operation.
OL-30420-01