Graceful Reload Of A Cisco Asr 9000 Series Router: Example - Cisco ASR 9000 Series Configuration Manual

Graceful Reload of a Cisco ASR 9000 Series Router: Example

The use of force option when doing an fpd upgrade is not recommended except under explicit direction
Note
from Cisco Engineering or TAC.
RP/0/RSP0/CPU0:router(admin)#
% RELOAD REMINDER:
- The upgrade operation of the target module will not interrupt its normal
- If automatic reload operation is desired after the upgrade, please use
- The output of "show hw-module fpd location" command will not display
Continue? [confirm]
Starting the upgrade/download of following FPD:
=========== ==== ======= ======= =========== =========
Location
=========== ==== ======= ======= =========== =========
0/RSP1/CPU0 lc
------------------------------------------------------
RP/0/RSP1/CPU0:Dec 11 16:18:01.982 : lc_fpd_upgrade[240]: %PLATFORM-UPGRADE_FPD-6-START :
Starting to upgrade rommon subtype image from 0.64 to 1.0 for this card on location
0/RSP1/CPU0
RP/0/RSP1/CPU0:Dec 11 16:18:01.989 : rommon_fpd_agent[303]: Start Upgrade...
RP/0/RSP1/CPU0:Dec 11 16:18:01.990 : rommon_fpd_agent[303]: Programming fpd instance 0...with
file
/net/node0_RSP0_CPU0/dev/shmem/asr9k-fpd-3.7.1.23I/fpd/ucode/rommon-viking-8641d-rsp2-B.bin
RP/0/RSP1/CPU0:Dec 11 16:18:11.604 : lc_fpd_upgrade[240]: %PLATFORM-UPGRADE_FPD-6-PASSED :
Successfully upgrade rommon subtype image for this card
% Successfully upgraded 1 FPD for A9K-RSP-4G-HDD on location 0/RSP1/CPU0
RP/0/RSP0/CPU0:ios(admin)#
Graceful Reload of a Cisco ASR 9000 Series Router: Example
In the following example, a Cisco ASR 9000 Series Router is gracefully reloaded following a ROM Monitor
firmware upgrade or downgrade:
RP/0/RSP0/CPU0:router#
Creating any missing directories in Configuration File system...OK
Initializing Configuration Version Manager...OK
Syncing commit database with running configuration...OK
RP/0/RSP0/CPU0:router#
WARNING: This will take the requested node out of service.
Do you wish to continue?[confirm(y/n)]
RP/0/RSP0/CPU0:router#
Redundancy information for node 0/RSP0/CPU0:
==========================================
Node 0/RSP0/CPU0 is in ACTIVE role
Partner node (0/RSP1/CPU0) is in STANDBY role
Standby node in 0/RSP1/CPU0 is ready
Standby node in 0/RSP1/CPU0 is NSR-ready
Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x
72
operation. However, for the changes to take effect, the target module
will need to be manually reloaded after the upgrade operation. This can
be accomplished with the use of "hw-module <target> reload" command.
the "reload" option at the end of the upgrade command.
correct version information after the upgrade if the target module is
not reloaded.
Type Subtype Upg/Dng
rommon upg
hw-module location 0/RSP1/CPU0 reload
cfs check
hw-module location 0/RSP1/CPU0 reload
show redundancy
Upgrading and Downgrading ROM Monitor Firmware
upgrade hw-module fpd rommon location 0/RSP1/CPU0
Current Upg/Dng
Version Version
0.64 1.0
y
on location 0/RSP1/CPU0
OL-30420-01